ANSI, ASME, ASA, B16.5 CAVUS CONFERRUMINO LABIUM
CLASS 150 / 300 / 600 / 1500
Dimensions & approximatae Missae Flange
| ANSI, ASME, ASA B16.5 150lb/sq.in.CAVUS CONFERRUMINO LABIUM RF | |||||||||||||
| Nominal Size |
| Extra Diam. | Crasso.de Flange | Diam.de Face | Diam Hub at Base | Longitudo Ictus Hub | Diam.de Bore | Profundum Pentium | No. de Holes | Diam.de Holes | Diam.de Repagula | Diam.of Bolt Circulus | Proxime.Pondus librarum kg |
| O | C | R | X | Y | B | D | |||||||
| 1/2″ | in. | 3.5 | 0.44 | 1.38 | 1.19 | 0.62 | 0.88 | 0.38 | 4 | 0.62 | 1/2 | 2.38 | 1 |
| mm. | 88.9 | 11.2 | 35.1 | 30.2 | 15.7 | 22.4 | 9.7 | 15.7 | 12.7 | 60.5 | 0.5 | ||
| 3/4″ | in. | 3.88 | 0.5 | 1.69 | 1.5 | 0.62 | 1.09 | 0.44 | 4 | 0.62 | 1/2 | 2.75 | 2 |
| mm. | 98.6 | 12.7 | 42.9 | 38.1 | 15.7 | 27.7 | 11.2 | 15.7 | 12.7 | 69.9 | 1 | ||
| 1″ | in. | 4.25 | 0.56 | 2 | 1.94 | 0.69 | 1.36 | 0.5 | 4 | 0.62 | 1/2 | 3.12 | 2 |
| mm. | 108 | 14.2 | 50.8 | 49.3 | 17.5 | 34.5 | 12.7 | 15.7 | 12.7 | 79.2 | 1 | ||
| 1 1/4″ | in. | 4.62 | 0.62 | 2.5 | 2.31 | 0.81 | 1.7 | 0.56 | 4 | 0.62 | 1/2 | 3.5 | 3 |
| mm. | 117.3 | 15.7 | 63.5 | 58.7 | 20.6 | 43.2 | 14.2 | 15.7 | 12.7 | 88.9 | 1 | ||
| 1 1/2″ | in. | 5 | 0.69 | 2.88 | 2.56 | 0.88 | 1.95 | 0.62 | 4 | 0.62 | 1/2 | 3.88 | 3 |
| mm. | 127 | 17.5 | 73.2 | 65 | 22.4 | 49.5 | 15.7 | 15.7 | 12.7 | 98.6 | 1 | ||
| 2″ | in. | 6 | 0.75 | 3.62 | 3.06 | 1 | 2.44 | 0.69 | 4 | 0.75 | 5/8 | 4.75 | 5 |
| mm. | 152.4 | 19.1 | 91.9 | 77.7 | 25.4 | 62 | 17.5 | 19.1 | 15.9 | 120.7 | 2 | ||
| 2 1/2″ | in. | 7 | 0.88 | 4.12 | 3.56 | 1.12 | 2.94 | 0.75 | 4 | 0.75 | 5/8 | 5.5 | 7 |
| mm. | 177.8 | 22.4 | 104.6 | 90.4 | 28.4 | 74.7 | 19.1 | 19.1 | 15.9 | 139.7 | 3 | ||
| 3″ | in. | 7.5 | 0.94 | 5 | 4.25 | 1.19 | 3.57 | 0.81 | 4 | 0.75 | 5/8 | 6 | 8 |
| mm. | 190.5 | 23.9 | 127 | 108 | 30.2 | 90.7 | 20.6 | 19.1 | 15.9 | 152.4 | 4 | ||
| 3 1/2″ | in. | 8.5 | 0.94 | 5.5 | 4.81 | 1.25 | 4.07 |
| 8 | 0.75 | 5/8 | 7 | 11 |
| mm. | 215.9 | 23.9 | 139.7 | 122.2 | 31.8 | 103.4 |
| 19.1 | 15.9 | 177.8 | 5 | ||
| 4″ | in. | 9 | 0.94 | 6.19 | 5.31 | 1.31 | 4.57 |
| 8 | 0.75 | 5/8 | 7.5 | 13 |
| mm. | 228.6 | 23.9 | 157.2 | 134.9 | 33.3 | 116.1 |
| 19.1 | 15.9 | 190.5 | 6 | ||
| 5″ | in. | 10 | 0.94 | 7.31 | 6.44 | 1.44 | 5.66 |
| 8 | 0.88 | 3/4 | 8.5 | 15 |
| mm. | 254 | 23.9 | 185.7 | 163.6 | 36.6 | 143.8 |
| 22.4 | 19.1 | 215.9 | 7 | ||
| 6″ | in. | 11 | 1 | 8.5 | 7.56 | 1.56 | 6.72 |
| 8 | 0.88 | 3/4 | 9.5 | 19 |
| mm. | 279.4 | 25.4 | 215.9 | 192 | 39.6 | 170.7 |
| 22.4 | 19.1 | 241.3 | 9 | ||
| 8″ | in. | 13.5 | 1.12 | 10.62 | 9.69 | 1.75 | 8.72 |
| 8 | 0.88 | 3/4 | 11.75 | 30 |
| mm. | 342.9 | 28.4 | 269.7 | 246.1 | 44.5 | 221.5 |
| 22.4 | 19.1 | 298.5 | 14 | ||
| 10″ | in. | 16 | 1.19 | 12.75 | 12 | 1.94 | 10.88 |
| 12 | 1 | 7/8 | 14.25 | 43 |
| mm. | 406.4 | 30.2 | 323.9 | 304.8 | 49.3 | 276.4 |
| 25.4 | 22.2 | 362 | 20 | ||
| 12″ | in. | 19 | 1.25 | 15 | 14.38 | 2.19 | 12.88 |
| 12 | 1 | 7/8 | 17 | 64 |
| mm. | 482.6 | 31.8 | 381 | 365.3 | 55.6 | 327.2 |
| 25.4 | 22.2 | 431.8 | 29 | ||
| 14″ | in. | 21 | 1.38 | 16.25 | 15.75 | 2.25 | 14.14 |
| 12 | 1.12 | 1 | 18.75 | 90 |
| mm. | 533.4 | 35.1 | 412.8 | 400.1 | 57.2 | 359.2 |
| 28.4 | 25.4 | 476.3 | 41 | ||
| 16″ | in. | 23.5 | 1.44 | 18.5 | 18 | 2.5 | 16.16 |
| 16 | 1.12 | 1 | 21.25 | 98 |
| mm. | 596.9 | 36.6 | 469.9 | 457.2 | 63.5 | 410.5 |
| 28.4 | 25.4 | 539.8 | 44 | ||
| 18″ | in. | 25 | 1.56 | 21 | 19.88 | 2.69 | 18.18 |
| 16 | 1.25 | 1 1/8 | 22.75 | 130 |
| mm. | 635 | 39.6 | 533.4 | 505 | 68.3 | 461.8 |
| 31.8 | 28.6 | 577.9 | 59 | ||
| 20″ | in. | 27.5 | 1.69 | 23 | 22 | 2.88 | 20.2 |
| 20 | 1.25 | 1 1/8 | 25 | 165 |
| mm. | 698.5 | 42.9 | 584.2 | 558.8 | 73.2 | 513.1 |
| 31.8 | 28.6 | 635 | 75 | ||
| 24″ | in. | 32 | 1.88 | 27.25 | 26.12 | 3.25 | 24.25 |
| 20 | 1.38 | 1 1/4 | 29.5 | 220 |
| mm. | 812.8 | 47.8 | 692.2 | 663.4 | 82.6 | 616 |
| 35.1 | 31.8 | 749.3 | 100 | ||
NOTE:
(1) Cum eae langiones plana facie requiruntur, praestari potest vel crassitudo plena vel elevata facie sublata.
Usores admonentur quod faciem elevatam removendo longitudinem per centrum abnorme reddet.
(2) Haec dimensio est pro amplo extremitate centrum, quod recta vel attenuata esse potest.staminea, lapsus, nervus glutinosus, flanges lambentes.
(3) Socket Weld Flange Bore Size SCH10, SCH20, SCH30, STD, SCH40, SCH60, SCH80, SCH100, SCH 120, SCH140, SCH160, XS.
| ANSI, ASME, ASA B16.5 300lb/sq.in.CAVUS CONFERRUMINO LABIUM RF | |||||||||||||
| Nominal Size |
| Extra Diam. | Crasso.de Flange | Diam.de Face | Diam Hub at Base | Longitudo Ictus Hub | Diam.de Bore | Profundum Pentium | No. de Holes | Diam.de Holes | Diam.de Repagula | Diam.of Bolt Circulus | Proxime.Pondus librarum kg |
| O | C | R | X | Y | B | D | |||||||
| 1/2″ | in. | 3.75 | 0.56 | 1.38 | 1.5 | 0.88 | 0.88 | 0.38 | 4 | 0.62 | 1/2 | 2.62 | 2 |
| mm. | 95.3 | 14.2 | 35.1 | 38.1 | 22.4 | 22.4 | 9.7 | 15.7 | 12.7 | 66.5 | 1 | ||
| 3/4″ | in. | 4.62 | 0.62 | 1.69 | 1.88 | 1 | 1.09 | 0.44 | 4 | 0.75 | 5/8 | 3.25 | 3 |
| mm. | 117.3 | 15.7 | 42.9 | 47.8 | 25.4 | 27.7 | 11.2 | 19.1 | 15.9 | 82.6 | 1 | ||
| 1″ | in. | 4.88 | 0.69 | 2 | 2.12 | 1.06 | 1.36 | 0.5 | 4 | 0.75 | 5/8 | 3.5 | 3 |
| mm. | 124 | 17.5 | 50.8 | 53.8 | 26.9 | 34.5 | 12.7 | 19.1 | 15.9 | 88.9 | 1 | ||
| 1 1/4″ | in. | 5.25 | 0.75 | 2.5 | 2.5 | 1.06 | 1.7 | 0.56 | 4 | 0.75 | 5/8 | 3.88 | 4 |
| mm. | 133.4 | 19.1 | 63.5 | 63.5 | 26.9 | 43.2 | 14.2 | 19.1 | 15.9 | 98.6 | 2 | ||
| 1 1/2″ | in. | 6.12 | 0.81 | 2.88 | 2.75 | 1.19 | 1.95 | 0.62 | 4 | 0.88 | 3/4 | 4.5 | 6 |
| mm. | 155.4 | 20.6 | 73.2 | 69.9 | 30.2 | 49.5 | 15.7 | 22.4 | 19.1 | 114.3 | 3 | ||
| 2″ | in. | 6.5 | 0.88 | 3.62 | 3.31 | 1.31 | 2.44 | 0.69 | 8 | 0.75 | 5/8 | 5 | 7 |
| mm. | 165.1 | 22.4 | 91.9 | 84.1 | 33.3 | 62 | 17.5 | 19.1 | 15.9 | 127 | 3 | ||
| 2 1/2″ | in. | 7.5 | 1 | 4.12 | 3.94 | 1.5 | 2.94 | 0.75 | 8 | 0.88 | 3/4 | 5.88 | 10 |
| mm. | 190.5 | 25.4 | 104.6 | 100.1 | 38.1 | 74.7 | 19.1 | 22.4 | 19.1 | 149.4 | 5 | ||
| 3″ | in. | 8.25 | 1.12 | 5 | 4.62 | 1.69 | 3.57 | 0.81 | 8 | 0.88 | 3/4 | 6.62 | 13 |
| mm. | 209.6 | 28.4 | 127 | 117.3 | 42.9 | 90.7 | 20.6 | 22.4 | 19.1 | 168.1 | 6 | ||
| 3 1/2″ | in. | 9 | 1.19 | 5.5 | 5.25 | 1.75 | 4.07 |
| 8 | 0.88 | 3/4 | 7.25 | 17 |
| mm. | 228.6 | 30.2 | 139.7 | 133.4 | 44.5 | 103.4 |
| 22.4 | 19.1 | 184.2 | 8 | ||
| 4″ | in. | 10 | 1.25 | 6.19 | 5.75 | 1.88 | 4.57 |
| 8 | 0.88 | 3/4 | 7.88 | 22 |
| mm. | 254 | 31.8 | 157.2 | 146.1 | 47.8 | 116.1 |
| 22.4 | 19.1 | 200.2 | 10 | ||
| 5″ | in. | 11 | 1.38 | 7.31 | 7 | 2 | 5.66 |
| 8 | 0.88 | 3/4 | 9.25 | 28 |
| mm. | 279.4 | 35.1 | 185.7 | 177.8 | 50.8 | 143.8 |
| 22.4 | 19.1 | 235 | 13 | ||
| 6″ | in. | 12.5 | 1.44 | 8.5 | 8.12 | 2.06 | 6.72 |
| 12 | 0.88 | 3/4 | 10.62 | 39 |
| mm. | 317.5 | 36.6 | 215.9 | 206.2 | 52.3 | 170.7 |
| 22.4 | 19.1 | 269.7 | 18 | ||
| 8″ | in. | 15 | 1.62 | 10.62 | 10.25 | 2.44 | 8.72 |
| 12 | 1 | 7/8 | 13 | 58 |
| mm. | 381 | 41.1 | 269.7 | 260.4 | 62 | 221.5 |
| 25.4 | 22.2 | 330.2 | 26 | ||
| 10″ | in. | 17.5 | 1.88 | 12.75 | 12.62 | 2.62 | 10.88 |
| 16 | 1.12 | 1 | 15.25 | 81 |
| mm. | 444.5 | 47.8 | 323.9 | 320.5 | 66.5 | 276.4 |
| 28.4 | 25.4 | 387.4 | 37 | ||
| 12″ | in. | 20.5 | 2 | 15 | 14.75 | 2.88 | 12.88 |
| 16 | 1.25 | 1 1/8 | 17.75 | 115 |
| mm. | 520.7 | 50.8 | 381 | 374.7 | 73.2 | 327.2 |
| 31.8 | 28.6 | 450.9 | 52 | ||
| 14″ | in. | 23 | 2.12 | 16.25 | 16.75 | 3 | 14.14 |
| 20 | 1.25 | 1 1/8 | 20.25 | 165 |
| mm. | 584.2 | 53.8 | 412.8 | 425.5 | 76.2 | 359.2 |
| 31.8 | 28.6 | 514.4 | 75 | ||
| 16″ | in. | 25.5 | 2.25 | 18.5 | 19 | 3.25 | 16.16 |
| 20 | 1.38 | 1 1/4 | 22.5 | 190 |
| mm. | 647.7 | 57.2 | 469.9 | 482.6 | 82.6 | 410.5 |
| 35.1 | 31.8 | 571.5 | 86 | ||
| 18″ | in. | 28 | 2.38 | 21 | 21 | 3.5 | 18.18 |
| 24 | 1.38 | 1 1/4 | 24.75 | 250 |
| mm. | 711.2 | 60.5 | 533.4 | 533.4 | 88.9 | 461.8 |
| 35.1 | 31.8 | 628.7 | 113 | ||
| 20″ | in. | 30.5 | 2.5 | 23 | 23.12 | 3.75 | 20.2 |
| 24 | 1.38 | 1 1/4 | 27 | 315 |
| mm. | 774.7 | 63.5 | 584.2 | 587.2 | 95.3 | 513.1 |
| 35.1 | 31.8 | 685.8 | 143 | ||
| 24″ | in. | 36 | 2.75 | 27.25 | 27.62 | 4.19 | 24.25 |
| 24 | 1.62 | 1 1/2 | 32 | 475 |
| mm. | 914.4 | 69.9 | 692.2 | 701.5 | 106.4 | 616 |
| 41.1 | 38.1 | 812.8 | 215 | ||
| ANSI, ASME, ASA B16.5 600lb/sq.in.CAVUS CONFERRUMINO LABIUM RF | |||||||||||||
| Nominal Size |
| Extra Diam. | Crasso.de Flange | Diam.de Face | Diam Hub at Base | Longitudo Ictus Hub | Diam.de Bore | Profundum Pentium | No. de Holes | Diam.de Holes | Diam.de Repagula | Diam.of Bolt Circulus | Proxime.Pondus librarum kg |
| O | C | R | X | Y | B | D | |||||||
| 1/2″ | in. | 3.75 | 0.56 | 1.38 | 1.5 | 0.88 | 0.88 | 0.38 | 4 | 0.62 | 1/2 | 2.62 | 2 |
| mm. | 95.3 | 14.2 | 35.1 | 38.1 | 22.4 | 22.4 | 9.7 | 15.7 | 12.7 | 66.5 | 1 | ||
| 3/4″ | in. | 4.62 | 0.62 | 1.69 | 1.88 | 1 | 1.09 | 0.44 | 4 | 0.75 | 5/8 | 3.25 | 3 |
| mm. | 117.3 | 15.7 | 42.9 | 47.8 | 25.4 | 27.7 | 11.2 | 19.1 | 15.9 | 82.6 | 1 | ||
| 1″ | in. | 4.88 | 0.69 | 2 | 2.12 | 1.06 | 1.36 | 0.5 | 4 | 0.75 | 5/8 | 3.5 | 4 |
| mm. | 124 | 17.5 | 50.8 | 53.8 | 26.9 | 34.5 | 12.7 | 19.1 | 15.9 | 88.9 | 2 | ||
| 1 1/4″ | in. | 5.25 | 0.81 | 2.5 | 2.5 | 1.12 | 1.7 | 0.56 | 4 | 0.75 | 5/8 | 3.88 | 5 |
| mm. | 133.4 | 20.6 | 63.5 | 63.5 | 28.4 | 43.2 | 14.2 | 19.1 | 15.9 | 98.6 | 2 | ||
| 1 1/2″ | in. | 6.12 | 0.88 | 2.88 | 2.75 | 1.25 | 1.95 | 0.62 | 4 | 0.88 | 3/4 | 4.5 | 7 |
| mm. | 155.4 | 22.4 | 73.2 | 69.9 | 31.8 | 49.5 | 15.7 | 22.4 | 19.1 | 114.3 | 3 | ||
| 2″ | in. | 6.5 | 1 | 3.62 | 3.31 | 1.44 | 2.44 | 0.69 | 8 | 0.75 | 5/8 | 5 | 9 |
| mm. | 165.1 | 25.4 | 91.9 | 84.1 | 36.6 | 62 | 17.5 | 19.1 | 15.9 | 127 | 4 | ||
| 2 1/2″ | in. | 7.5 | 1.12 | 4.12 | 3.94 | 1.62 | 2.94 | 0.75 | 8 | 0.88 | 3/4 | 5.88 | 13 |
| mm. | 190.5 | 28.4 | 104.6 | 100.1 | 41.1 | 74.7 | 19.1 | 22.4 | 19.1 | 149.4 | 6 | ||
| 3″ | in. | 8.25 | 1.25 | 5 | 4.62 | 1.81 | 3.57 | 0.81 | 8 | 0.88 | 3/4 | 6.62 | 16 |
| mm. | 209.6 | 31.8 | 127 | 117.3 | 46 | 90.7 | 20.6 | 22.4 | 19.1 | 168.1 | 7 | ||
| 3 1/2″ | in. | 9 | 1.38 | 5.5 | 5.25 | 1.94 | 4.07 |
| 8 | 1 | 7/8 | 7.25 | 21 |
| mm. | 228.6 | 35.1 | 139.7 | 133.4 | 49.3 | 103.4 |
| 25.4 | 22.2 | 184.2 | 10 | ||
| 4″ | in. | 10.75 | 1.5 | 6.19 | 6 | 2.12 | 4.57 |
| 8 | 1 | 7/8 | 8.5 | 37 |
| mm. | 273.1 | 38.1 | 157.2 | 152.4 | 53.8 | 116.1 |
| 25.4 | 22.2 | 215.9 | 17 | ||
| 5″ | in. | 13 | 1.75 | 7.31 | 7.44 | 2.38 | 5.66 |
| 8 | 1.12 | 1 | 10.5 | 63 |
| mm. | 330.2 | 44.5 | 185.7 | 189 | 60.5 | 143.8 |
| 28.4 | 25.4 | 266.7 | 29 | ||
| 6″ | in. | 14 | 1.88 | 8.5 | 8.75 | 2.62 | 6.72 |
| 12 | 1.12 | 1 | 11.5 | 80 |
| mm. | 355.6 | 47.8 | 215.9 | 222.3 | 66.5 | 170.7 |
| 28.4 | 25.4 | 292.1 | 36 | ||
| 8″ | in. | 16.5 | 2.19 | 10.62 | 10.75 | 3 | 8.72 |
| 12 | 1.25 | 1 1/8 | 13.75 | 115 |
| mm. | 419.1 | 55.6 | 269.7 | 273.1 | 76.2 | 221.5 |
| 31.8 | 28.6 | 349.3 | 52 | ||
| 10″ | in. | 20 | 2.5 | 12.75 | 13.5 | 3.38 | 10.88 |
| 16 | 1.38 | 1 1/4 | 17 | 170 |
| mm. | 508 | 63.5 | 323.9 | 342.9 | 85.9 | 276.4 |
| 35.1 | 31.8 | 431.8 | 77 | ||
| 12″ | in. | 22 | 2.62 | 15 | 15.75 | 3.62 | 12.88 |
| 20 | 1.38 | 1 1/4 | 19.25 | 200 |
| mm. | 558.8 | 66.5 | 381 | 400.1 | 91.9 | 327.2 |
| 35.1 | 31.8 | 489 | 91 | ||
| 14″ | in. | 23.75 | 2.75 | 16.25 | 17 | 3.69 | 14.14 |
| 20 | 1.5 | 1 3/8 | 20.75 | 230 |
| mm. | 603.3 | 69.9 | 412.8 | 431.8 | 93.7 | 359.2 |
| 38.1 | 34.9 | 527.1 | 104 | ||
| 16″ | in. | 27 | 3 | 18.5 | 19.5 | 4.19 | 16.16 |
| 20 | 1.62 | 1 1/2 | 23.75 | 330 |
| mm. | 685.8 | 76.2 | 469.9 | 495.3 | 106.4 | 410.5 |
| 41.1 | 38.1 | 603.3 | 150 | ||
| 18″ | in. | 29.25 | 3.25 | 21 | 21.5 | 4.62 | 18.18 |
| 20 | 1.75 | 1 5/8 | 25.75 | 400 |
| mm. | 743 | 82.6 | 533.4 | 546.1 | 117.3 | 461.8 |
| 44.5 | 41.3 | 654.1 | 181 | ||
| 20″ | in. | 32 | 3.5 | 23 | 24 | 5 | 20.2 |
| 24 | 1.75 | 1 5/8 | 28.5 | 510 |
| mm. | 812.8 | 88.9 | 584.2 | 609.6 | 127 | 513.1 |
| 44.5 | 41.3 | 723.9 | 231 | ||
| 24″ | in. | 37 | 4 | 27.25 | 28.25 | 5.5 | 24.25 |
| 24 | 2 | 1 7/8 | 33 | 730 |
| mm. | 939.8 | 101.6 | 692.2 | 717.6 | 139.7 | 616 |
| 50.8 | 47.6 | 838.2 | 331 | ||
Productio Capacity & Purchase Details
Supple 1. Dimensio LABIUM DN15 – DN2000 (1/2″ – 80″), Flangae fictae.
Materia carbonis Steel: ASTM A105, A181, A350 LF1, A350LF2, A350LF3, A36, A234 WPB, Q235B, 20#, 20Mn etc.
Materies Steel: ASTM A182 F304, F304L, F316, F316L, F321 etc.
4. Flanges Anti Rust: Anti Rubigo Oleum, Pingere nigrum, Pingere Flavum Coating, Calidum Intinctum Galvanized, Frigidum Galvanized etc.
5. Monthly Output: 3000 tons per Month.
6. Termini partus: CIF, CFR, FOB, EXW.
7. Termini Payment: Filum Translatio (T/T), Irrevocabilis L/C ad Visum etc.
8. Ordo Quantitatis Minimum: 1Ton vel 100Pcs.
9. Quality Guarantee: EN10204 3.1 Certificatorium, molendinum certificatorium, tertiae inspectionis factio, substitutio gratuiti servitii.
10. Plura Requisita in Foro Flanges reperies.